How to Correctly Change Brother Toner Cartridges in your Printer?

The process of replacing the toner cartridges in Brother printer may sound a little intimidating. It is although not as complicated as it may seem like. The method varies a bit depending upon the model you are using. If you are someone who require a lot of printing material, you must know how to replace toner Brother. There are two parts, toner cartridges and drum unit which work together to produce a print. The toner cartridge is the section which contains the powder or ink required to print. The drum unit is the electrically charged part of the device which converts the ink to the paper. They both are required to be installed and work together to print anything. It’s not permanent supply which printer produces itself therefore you need to change it when it is empty. Here is a step wise guide on Brother printer replace toner procedure. The printer displays the message to replace the printer when it’s finished. It is important that you do not ignore the instructions provided the machine otherwise the Brother printer will end heating up and it will be reflected in the quality of the prints.

Before we move on to replacing the toner cartridges. Let’s have a look on how to prepare it for the process briefly. Take out the new cartridges out of the box. Remove the packing carefully. There is a orange colour clip at the bottom for protection. Remove the clip. There can be a little powder dust there you can take it over the trash can or place an old cloth beneath itit and slowly remove the tape. The tape would easily come out in one and you have your cartridge ready to be installed.

How to Change Toner in Brother printer?

• Switch on your Brother printer and open the front cover lid.
• Now, remove the old toner cartridges and drum unit from their respective slots.
• Slowly push the green lock lever which must be on the side of the cartridges.
• Then, take the new cartridges which as we discussed earlier is ready to be installed.
• Slide the new toner in the spot and you will hear a click sound when it is adjusted properly.
• Install the complete unit.
• Cover the lid carefully, if everything is installed in it’s place the cover will slide smoothly.

As we saw, follow the process mentioned above carefully to successfully install the toner cartridges. It is important that you correctly change the toner otherwise the prints won’t be produced. The process is quite simple, you just need to be careful while doing it. Make sure your hands are clean and dry while you’re carrying out the task. Wear the gloves if required. There is a specific slot for each part in the printer and it is necessary that the new cartridges are placed in the same ones.