bottle blowing machine 

Liquor filling machine parts maintenance method measures:
A filling machine, liquor must turn the machine by shaking the PET blowing machine handle before driving, check whether the rotation has a different shape, to determine the normal driving again. Two, see if there are any more card filling nozzle valve core plug surface open or delay, if there is any card, want to install the valve core from the good position. Such as delay to open, it is necessary to regulate the thin cylinder throttle valve.
Three, adjust the machine tool to use proper, it is forbidden to use too much tools or too hard to demolish parts to avoid damage to parts or affect machine performance.
Fourth, see all of the sealing ring is damaged, if there are any damage, please replace the new one.
Five, the liquor filling machine, after adjusting for must will loose the screw tight good, turn the machine by shaking the handle look after the action is in accordance with the requirements, party can drive a car.
Six, the inspection of liquor filling machine filling velocity is bottle blowing machine too fast, throttle valve, adjust the filling speed by filling speed.
Seven, check the speed throttle valve and the filling interval throttle valve is closed, throttle valve cannot be closed.
Eight, view fast loading a foreign body inside the 3-way valve, if you have to immediately arrangement; See under fast loading the 3-way valve and filling head of air is there inside the hose, if there is air, will be cut or eliminate air as far as possible.
In the process of mobile liquor filling machine, should pay attention to the direction of the filling machine is correct, but also focus on the surrounding environment, so as to avoid a collision. After the good production equipment selected location, at the liquid bottle filling machine time of the filling machine for the ground parking, there should be a relevant personnel to support around to avoid equipment for parking is not smooth, cause equipment, bring unnecessary damage to equipment. After unpacking, can use fork fork at the bottom of the main body in front of the filling machine, but the length of the ChaJiao must be long enough, than rail machine. In addition to the user to specify the packing way, in the process of filling machine for transport, mechanical usually use simple packaging, to pay attention to in the light, to avoid a collision. After filling machine placed flat, must to the filling machine to conduct a comprehensive inspection, before receiving electric timing.