316ti stainless steel 

Generally divided into martensite stainless steel plate, ferritic 316 stainless steel plate stainless steel plate, austenitic stainless steel, duplex stainless steel plate and precipitation hardening stainless steel plate or divided into two major categories of nickel chromium stainless steel plate and stainless steel plate. Quite useful typical use: the pulp and paper used heat exchanger equipment, mechanical equipment, dyeing equipment, film processing equipment, pipelines, coastal areas wait outside the building.
Stainless steel plate surface is smooth, high plasticity, toughness and mechanical strength, acid and alkali corrosion of gas, solution, and other media. It is a kind of alloy steel is not easy to rust, but not absolutely not rust.
According to the organizational structure is divided into austenitic stainless steel, martensite stainless steel plate (including precipitation hardening stainless steel plate), ferritic stainless steel plate, and two phase austenite and ferrite stainless steel plate and so on four categories? According to some characteristics of the main chemical composition of steel sheet or plate element to classification, divided into chromium stainless steel, chromium nickel stainless steel plate, nickel chromium molybdenum stainless steel plate, and low carbon stainless steel plate, high molybdenum stainless steel plate, high purity stainless steel plate, etc. According to the performance characteristics of the steel plate and USES classification, divided into nitric acid stainless steel plate, stainless steel plate, sulfate resistance to pitting corrosion of stainless steel plate and stress corrosion of stainless steel plate, high strength stainless steel plate, etc. According to the functions and characteristics of the steel plate, classification, divided into low temperature stainless steel plate, non-magnetic stainless steel plate, free cutting stainless steel plate, the superplasticity x52 line pipe of stainless steel plate, etc. Now common classification method is according to the structure characteristics of steel plate and steel chemical composition and method of the combination of classification.
Stainless steel plate is smaller than 304 carbon content. 304 l on weld or other processing place above the pitting is better than in 304. 304 l or eliminate stress after welding, the grain boundary corrosion resistance good; Under the condition of without heat treatment, can also keep a good corrosion resistance, temperature - 196 ° C to 800 ° C.
Stainless steel has good corrosion and corrosion resistance and good resistance to intergranular corrosion.
For oxidizing acid, obtained in the experiment, the 316ti stainless steel concentration of 65% or less under the boiling temperature of nitric acid, 304 stainless steel has a strong corrosion resistance. To most organic and inorganic acid and alkali solution with good corrosion resistance ability.