Forum

In 2021, the Ghana lifting equipment market will grow by X% to $X for the first time since 2018, thus ending a two-year downward trend. However, consumption continued to show a sharp downward trend during the period under review. During the period under review, the market hit an all-time high of $X in 2012; however, from 2013 to 2021, consumption failed to regain momentum. Ghana’s lifting equipment export scale After four years of decline, overseas shipments of lifting equipment increased by X% to X units in 2021. But overall, exports continued to show a sharp decline. The growth rate was most pronounced in 2015, with an X% increase over the previous year. During the period under review, exports reached a maximum of X units in 2016; however, from 2017 to 2021, exports failed to regain momentum. Lifting equipment exports soar to $X in 2021 by value. Overall, exports showed significant growth. The most significant growth rate occurred in 2015, which was an X% increase compared to the previous year. Exports peaked at $X in 2016; however, from 2017 to 2021, exports were at lower levels. Denmark (X units) is the main destination for Ghanaian hoisting equipment exports, accounting for X% of total exports. In addition, exports of lifting equipment to Denmark exceeded six times that to the second largest destination, the Netherlands (X units). From 2012 to 2021, the average annual growth rate of freight traffic to Denmark is +X%. In value terms, Denmark ($X) remains the leading foreign market for Ghana’s lifting equipment exports, accounting for X% of total exports. In second place is the Netherlands ($X) with X% of total exports. From 2012 to 2021, the average annual growth in value to Denmark totals +X%. Import scale of lifting equipment in Ghana In 2021, foreign supply of lifting equipment finally picked up, reaching X units for the first time since 2018, ending a two-year downward trend. During the period under review, however, imports fell sharply. The growth rate was most pronounced in 2018, when imports increased by X% year-on-year. During the period under review, imports reached a maximum of X units in 2012; however, from 2013 to 2021, imports failed to regain momentum. In value terms, imports of hoisting equipment surge to $X in 2021. But overall, imports face a sudden contraction. The growth rate was most pronounced in 2014, with an X% increase. As a result, imports peaked at X dollars. Import growth will remain low between 2015 and 2021. In 2021, China (X units) is the largest supplier of lifting equipment to Ghana, accounting for X% of total imports. In addition, imports of hoisting equipment from China were twice as high as the number recorded by the second largest supplier, Japan (X units). From 2012 to 2021, the average annual growth rate of Chinese exports totals +X%. The average annual growth rates of imports for the remaining suppliers are as follows: Japan (+X% per annum) and the United Arab Emirates (+X% per annum). By value, the largest lifting equipment suppliers to Ghana are Japan ($X), China ($X) and the United Arab Emirates ($X) with X% of total imports. With a CAGR of +X%, Japan saw the highest growth in import value among the major suppliers during the period under review, while procurement from other leaders showed a mixed trend. Statistics of various crane suppliers in Ghana The largest suppliers of lifting equipment to Ghana by value are Japan, China and the United Arab Emirates, which together account for 17% of total imports. Denmark remains the main foreign market for Ghana’s hoisting equipment exports by value, accounting for 60% of total exports. In second place is the Netherlands ($729) with 27% of total exports. The average export price of hoisting equipment in 2021 is US$394/unit, an increase of 15% over the previous year. The average import price of hoisting equipment in 2021 is US$2,411 per unit, up 1.6% from the previous year. How to customize crane from China We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a crane, you can leave a message on the website or Email: [email protected], tell us the following information, and our sales manager will contact you: Ghana Lifting Equipment Market Analysis 2022

Data from China Customs shows that in 2021 Cameroon imported overhead cranes from China worth US$662,000, compared with US$18,000 in 2020. In terms of import quantity, Cameroon will import a total of 10 sets of overhead cranes from China in 2021, with an average import unit price of US$66,200, and will import 1 set of overhead cranes from China in 2020, with an average import unit price of US$18,000. Judging from the data, Cameroon will see a substantial increase in demand for Chinese-made overhead cranes in 2021. For Chinese bridge crane manufacturers, how to sell more high-quality bridge cranes to Cameroon will be a problem that needs to be considered. As an excellent crane supplier in China, Dongqi Crane has received 5 inquiries about electric hoists from Cameroon in 2021. Over the years, it has rich experience in crane installation and service in Cameroon. For the bridge cranes needed in Cameroon, Dongqi Crane has a variety of different types of bridge cranes to choose from. In order to help Cameroonian customers better understand the classification of overhead cranes, this article will introduce the working characteristics of different types of overhead cranes one by one. If you are interested in our products, you can click here to contact us, or tell us by Email: [email protected] Types of overhead cranes sold by Dongqi Crane to Cameroon Grab Bucket Overhead Crane for sale to Cameroon Grab crane is a heavy duty double girder overhead crane equipped with grab bucket, which can be used frequently. The lifting capacity of grab crane included the dead weight of the grab bucket is 5 ton to 25 tons. The working class of the grab crane is A6. The specifications of the grab crane is given in the following table for your reference and customized design can be provided by Dongqi crane. Get a quote LD Single Girder Overhead Crane for sale to Cameroon Dongqi supply the single girder crane with lifting capacity: 1~20t, span:7.5~28.5m, lifting height 1~30m, low work class A3,A4. We also design and manufacture the nonstandard crane according users’ demanding. This crane is used in ambient temperature of -25℃～+40℃，humidity≤85%，elevation under 1000m，power supply is 3-ph, 380V,50HZ(can change as user demand). Get a quote QC Electromagnetic Overhead Crane for sale to Cameroon QC Electromagnetic overhead crane is a kind of material handling equipment, equipped with detachable electromagnetic chuck and corresponding operating system to handle and lift metal objects. The lifting capacity of the electromagnetic overhead crane included the weight of electromagnetic is 5 to 32 ton. The working class of electromagnetic crane is A5 and A6. The magnetic retentive time is 10 to 30 minutes. Get a quote LH Double Girder overhead Crane for sale to Cameroon Electric Hoist Double girder Overhead crane is an overhead crane with the electric hoist as the lifting mechanism, with the lifting capacity 5 ton to 63 ton, used for general material handling and lifting. The working class of the electric hoist overhead is A3 to A5. Type:LH Lifting Capacity:5~63t Lifting Height:Span:8m~32m Working Duty:A3~A5 Ambient Temperature:-20~40℃ Get a quote QD Double Girder Overhead Crane for sale to Cameroon QD double girder overhead crane is composed of bridge, travelling mechanism, trolley, electric equipment. Main girder adopts box welded structure, crane travelling mechanism adopts separate drive, and lifting mechanism is equipped winch. All mechanism are controlled in driver’s cab. QD model double girder overhead crane is applied in open warehouse or rail sideways to conduct common loading unloading and material handling works. It is a heavy duty type overhead crane that satisfy frequently using. Get a quote QY Insulation Overhead Crane for sale to Cameroon Insulation overhead crane is widely used in smelting workshops of electrolytic nonferrous metal, aluminum and magnesium. This insulation overhead crane is constituted by box-type main girder, crane traveling mechanism, trolley and electrical parts. To prevent the current passing through the lifting mechanism to the crane and threatening the operator’s life, parts of the insulation overhead crane are protected by insulation treatment. Insulation overhead crane work level is heavy duty, so the main lifting is equipped with dual braking in order to ensure safe production. Get a quote European Double Girder Overhead Crane for sale to Cameroon European double girder overhead crane is the latest version of overhead crane, designed with FEM standards, developed on the base of traditional crane, therefore, European double girder overhead crane has unbeatable advantages, such as, unparalleled performance, tight structure, light dead weight, high safety and reliability, high perform efficiency, and widely applications for various industries. Due to the design advantages, European double girder overhead crane could help you to lower initial investment for factory construction, increase productivity, and lower efforts for daily maintenance, and reduce energy consumption, and obtain higher return on investment. Get a quote Types of Overhead Cranes sold to Cameroon 20/5 Ton Lh Model Hoist Type Double Beam Overhead Crane for sale to Cameroon Lifting weight: 20 tons Lifting height: 10 meters Span: 22 meters Working voltage: 380/3/50 Steelworks 15 ton QC Overhead Magnet Crane for sale to Cameroon Lifting weight: 15 tons Lifting height: 10 meters Span: 16 meters Working voltage: 380/3/50 Magnetic Crane for Steel Coil Scrap Bar Pipe Handling Lifting for sale to Cameroon Lifting weight: 10 tons Lifting height: 8 meters Span: 12 meters Working voltage: 380/3/50 Customized QC Overhead Crane for Steel Iron Scraps Handling Magnet Cranes for sale to Cameroon Lifting weight: 30 tons Lifting height: 9 meters Span: 15 meters Working voltage: 380/3/50 20 ton Electromagnetic Double Girder Overhead Crane for Steel Factory Using for sale to Cameroon Lifting weight: 20 ton overhead crane Lifting height: 10 meters Span: 12 meters Working voltage: 380/3/50 How to customize Overhead Crane from China We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a Overhead Crane, you can leave a message on the website or Email: [email protected], tell us the following information, and our sales manager will contact you: Overhead cranes are sold from China to Cameroon

Data from China Customs shows that in 2021 Croatia imported electric hoists from China worth $530,000 and non-electric hoists worth $383,000, compared with $374,000 and $447,000 in 2020. From the perspective of import amount, the Croatian crane market has increased demand for electric hoists produced in China. As a world factory, China has rich technical reserves and good production quality, and the electric hoists produced are more and more popular in the world. As an excellent crane supplier in China, Dongqi Crane can produce various types of electric hoists and non-electric hoists, which can meet the working requirements of most special working environments. In order to help Croatian customers better understand the types of electric hoists, this article will introduce the types and working characteristics of electric hoists under Dongqi Hoisting. If you are interested in our products, you can click here to contact us, or tell us by Email: [email protected] Types of electric hoists sold by Dongqi Hoist to Croatia MD1 Double Speed Electric Hoist for Croatia Double speed electric hoist is a small-sized lifting equipment, which is installed on the single girder, bridge cranes, gantry cranes, jib cranes for material handling. As one of the commonly used material handling equipment, the double speed electric hoist is usually used in factory, mining, railway, port, and storage, etc. Get a quote CD1 Single Speed Electric Wire Rope Hoist for Croatia Electric wire rope hoist is a type of material handling equipment, installed on a single beam crane, linear curve strander beams or it can be used at the hoisting mechanism of double beam crane, gantry crane, linear crane for material handling by industrial and mining enterprises, railways, and warehouses, etc. The lifting capacity of single speed electric wire rope hoist is 0,5 to 32 ton and the working class is M3 and M4 Get a quote European Electric Hoist for Croatia European wire rope electric hoist is a newly developed material handling equipment with advanced design technology according to the FEM standards and other regulations. The new serial of wire rope electric hoist is environment-friendly, energy saving and cost-effective which ranks top among similar products. The lifting capacity of the European wire rope electric hoist is 1 to 80 tons and the working class is M5 and M6. Customized European wire rope electric hoist are available. Get a quote Electric Chain Hoist for Croatia Electric chain hoist is a light and small lifting equipment for material handling. Electric chain hoist is mainly consisted of motor, transmission mechanism and chain wheel, etc. Electric chain hoists from DQCRANES have the features of beautiful outlook, solid durability, and international technology, etc. The inside gears of electric chain hoist are hot quenched which increases the wear resistance of the gear and toughness. The lifting capacity of electric chain hoist is 0.5 to 35 ton, and the working class is M3 or M4 Get a quote Low Headroom Electric Wire Rope Hoist for Croatia Low headroom electric hoist is transformed from CD / MD electric hoist. The product has the characteristics of compact structure, lifting single, double speed, high effective lifting stroke and stable operation. It has wide application range, especially in new factory buildings. The height of the trip can reduce the height of the building and reduce the construction cost. Get a quote Manual Chain Hoist / Chain Block for Croatia Manual chain hoist / chain block is one of the most economical material handling equipment with features of hand operation, simple structure, cost-effective, widely application, etc. What’s more, the spark resistant features, such as, stainless steel, bronze hooks, chains, wheels, etc are available to manual chain hoist / chain block. The lifting capacity of manual chain hoist / chain block is 0.5 to 100 ton Get a quote Types of electric hoists sold to Croatia CD Building Construction Tools Lifting Machine Hoist 16 T Electric Wire Rope Hoist for sale to Croatia Lifting weight: 16 tons Lifting height: 6 meters Working voltage: 380/3/50 CD 10t Electric Wire Rope Lifting Equipment Hoist for sale to Croatia Lifting weight: 10 tons Lifting height: 8 meters Working voltage: 380/3/50 5t Electric Chain Hoisting Equipment Chain Hoist with Trolley for sale to Croatia Lifting weight: 5 tons Lifting height: 9 meters Working voltage: 380/3/50 Best Price Electric Chain Hoist with Electric Monorail Trolley for sale to Croatia Lifting weight: 10 tons Lifting height: 15 meters Working voltage: 380/3/50 Electric Lift Chain Hoist with Electric Trolley on H Steel Beam for sale to Croatia Lifting weight: 6 tons Lifting height: 5 meters Working voltage: 380/3/50 How to customize electric hoist from China We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a electric hoist, you can leave a message on the website or Email: [email protected] , tell us the following information, and our sales manager will contact you: Electric hoist sold from China to Croatia

Data from China Customs shows that the Czech Republic will import various types of crane equipment from China worth US$6.192 million in 2021, which is not much different from the total import value of US$6.136 million in 2020. Dongqi Crane is optimistic about the future Czech crane market. As a major manufacturing country, China has been recognized worldwide for its technological accumulation and quality control in the field of cranes. On the other hand, the Czech Bureau of Statistics released initial data on February 7. In 2021, the bilateral trade volume between China and the Czech Republic will be 38.3 billion US dollars, a year-on-year increase of 14.2%, accounting for 8.7% of the Czech Republic’s total foreign trade. Among them, the Czech Republic’s exports to China were US$3 billion, a year-on-year increase of 12.3%, accounting for 1.3% of the Czech Republic’s total exports; the Czech Republic’s imports from China were US$35.3 billion, a year-on-year increase of 14.3%, accounting for 16.7% of the Czech Republic’s total imports. Czech’s import value of cranes imported from China from January to December 2021/2020 Czech’s import value of cranes from China by month   2020 2021 01 1189831.00 356993.00 02 151113.00 299580.00 03 427885.00 311965.00 04 846811.00 253467.00 05 584037.00 369427.00 06 310112.00 431686.00 07 490623.00 250500.00 08 332584.00 370557.00 09 458014.00 1855420.00 10 519505.00 762504.00 11 477595.00 379230.00 12 347891.00 550416.00 Total 6136001.00 6191745.00 Statistics of imported cranes in Czech in 2021 by category As can be seen from the table data below, among various types of cranes imported by the Czech Republic from China, Parts of lifts, tipping cranes or escalators, Gantry Crane, Electric Pulleys and Hoists have the highest import value. Although there are few types of cranes imported from the Czech Republic, the types of cranes that Dongqi can provide for the Czech Republic include: gantry cranes, electric hoists, non-electric hoists, and bridge cranes. Among them, the import value of gantry cranes ranks second, and the import value of electric hoists ranks second. third. As an excellent crane supplier in China, Dongqi Crane can independently complete the installation and after-sales service of the above types of cranes in the Czech Republic. Commodity code Crane Type Import value Total   6191745.00 84313100 Parts of lifts, tipping cranes or escalators 3885149.00 84261930 Gantry Crane 1287985.00 84251100 Electric Pulleys and Hoists 708458.00 84251900 Non-electric trolleys and hoists 280308.00 84269900 Unlisted Crane 19362.00 84261120 Universal Overhead Crane 10483.00 84261190 Overhead mobile cranes with other fixed supports   84261990 Unlisted bridge cranes and mobile spreaders and straddle carriers   84262000 Tower Crane   84263000 Portal Crane and Pedestal Jib Crane   84264110 Rubber-mounted self-propelled crane   84264190 Other self-propelled hoists with rubber wheels   84264910 Crawler Crane   84264990 Other self-propelled hoists without rubber wheels   84269100 Other cranes for installation on road vehicles   84281090 Other lifts and tipping cranes   Import volume of various types of cranes in Czech in 2021 Commodity code Crane Type Quantity Total   2734516 84313100 Parts of lifts, tipping cranes or escalators 2715128 84251100 Electric Pulleys and Hoists 12541 84251900 Non-electric trolleys and hoists 6838 84269900 Unlisted Crane 6 84261930 Gantry Crane 2 84261120 Universal Overhead Crane 1 84261190 Overhead mobile cranes with other fixed supports   84261990 Unlisted bridge cranes and mobile spreaders and straddle carriers   84262000 Tower Crane   84263000 Portal Crane and Pedestal Jib Crane   84264110 Rubber-mounted self-propelled crane   84264190 Other self-propelled hoists with rubber wheels   84264910 Crawler Crane   84264990 Other self-propelled hoists without rubber wheels   84269100 Other cranes for installation on road vehicles   84281090 Other lifts and tipping cranes   How to customize crane from China We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a crane, you can leave a message on the website or Email: [email protected], tell us the following information, and our sales manager will contact you: Statistics of Czech’s import of cranes from China in 2021

We have completed 1 order for 1 ton jib crane from Pakistan. Pillar Mounted Jib Crane Parameters Lifting Capacity=1ton Lifting height=6m Valid radius=6m 400v/60Hz/3p Pendant control Note: Our offer includes supply of complete crane & power line. The anchor foundation bolts of this jib crane are included. Foundation steel reinforcing bars, cement and sand will be provided by client. Installation does not include the foundation work. Pillar Mounted Jib Crane Technical specifications Lifting capacity t 1 Lifting height m     6 Total arm length   6.7 Valid radius   6 Rotation angle ° 360 Chain diameter mm 7.1 Speed Slewing speed r/min 0.6   Hoist traveling speed m/min 21   Lifting speed   6.6 Working class   / M3 Power supply   V/Hz/P 400/60/3 Total weight kg 2100 Protection class / IP54 Insulation class / F Working temperature / -20℃ ~ +40℃ Jib Crane Finished Installation for reference (The above picture is for reference to crane model only) The column type jib crane can be widely used for lifting heavy objects in factories, mines, workshops, production lines, assembly lines, machine tools, warehouses, docks and other occasions Pillar Jib Crane Package and Delivery Product Certifications Our products have passed CE (ECM) and ISO Certifications, and you can also specify a third-party agency for quality testing. Fees of third-party testing are not included in this offer. 1t Pillar Mounted Jib Crane with Electric Chain Hoist for sale to Pakistan