We have completed 1 order for 5 ton overhead crane from UAE. This is a European style single girder overhead crane, we have matched ABM & Siemens motor for our customers. In addition to this, there are P22 Rails with bolted clamps and welding plates and a 6mm²Seamless bus bar system
Single Girder Overhead Crane parameters
- Rated capacity: 5 ton
- Span: 18m
- Lifting height: 7m
- Power supply: 480V 60Hz 3P
- Remote control
- ABM motor for hoist trolley
- Siemens motor for crane travelling
Technical information
| Lifting capacity | t | 5 | ||
| Lifting height | m | 7 | ||
| Span | m | 18 | ||
| Speed | Cross traveling speed | m/min | 2-20 (inverter control) | |
| Crane traveling speed | 2-20 (inverter control) | |||
| Lifting speed | 0.7/4.0 (double speed) | |||
| Working class | / | FEM 2M | ||
| Power supply | V/Hz/Ph | 480/60/3 | ||
| Cross traveling power | KW | 0.55 | ||
| Crane traveling power | 0.55*2 | |||
| Hoisting power | 1.2/7.6 | |||
| Total power | 10.45 | |||
| Max wheel load | KN | 61.9 | ||
| Weight of main girder | KG | 4400 | ||
| Total weight | 6350 | |||
| Protection class | / | IP55 | ||
| Insulation grade | / | F | ||
| Ambient temperature | / | -10℃~+40℃ | ||
| Anti-collision system | / | Included | ||
| Phase protection relays | / | Included | ||
| Limit switch | / | Included | ||
| Voltage Low Protect device | / | Included | ||
| Emergency stop action | / | Included | ||
| Ground fault protection | / | Included | ||
| Short-circuit protection | / | Included | ||
| Over-heating protection | / | Included | ||
| Power-off protection | / | Included | ||
| Over-current protection | / | Included | ||
| Overload protector | / | Included | ||
| Top Quality Buffer | / | Included | ||
| Country of origin | / | China | ||
Rail Specification
| Type | Top Width(mm) | Bottom Width(mm) | Height(mm) | Weight(kg/m) |
| P22 | 50.8 | 93.66 | 93.66 | 22.3 |
Overhead Crane Finished Installation
(The above picture is for reference to crane model only)
QD type hook bridge crane is a general-purpose bridge crane for trolleys. The crane relies on the longitudinal movement along the direction of the supporting track on the driving beam of the workshop, the lateral movement of the trolley and the lifting of the hook to realize the working process. The common lifting capacity is 5 tons-600t , working level A3A4A5-A8. There are three types of bridge crane operation modes: ground control, control room control and remote control for users to choose.
A5 level is suitable for general machining and assembly workshops, metal structure workshops, mechanical maintenance workshops, etc., where the workload is not very heavy;
A6 and A7 grades are suitable for occasions with frequent work or continuous production or continuous handling, and can also be used as shop-lifting and hoisting in metallurgical and foundry workshops; the operating environment temperature is -20-40 ℃, and the relative humidity is ≤85%;
5t European-spec Single Girder Overhead Crane (ABM& Siemens motor) For Sale To UAE
